# 9 - FM Telephone Transmitter
Circuit Board Artwork, Stripboard,
and Breadboard Layout
Schematic - All Electronic Parts Digi-Key Electronics
for this Circuit is Given To, and it's Details are listed on:
By a reliable source who does not wish to be identified
2012 radio-circuits .com
- Regular and Minimum Etch. To Get The Artwork - Do a right click on
your mouse and save the image.
Schematic - L1 is 4
turns of # 20 copper wire 3/16 Air Wound. Antenna is 8 to 16" of thin stranded wire. The clips
clip to the red and green pair of the phone wires.
Transmits both sides of the conversation.